Labels:autoradiograph | bird | earth | road | sky OCR: Design of the PE/2 Chassis PE/2 Backplane Layout PE/2 Backplane Layout The PE/2 backplane is the main printed circuit board used in the PE/2 chassis. It makes up the slot expansion bus which is where the PE Cards are installed. The PE/2 Backplane also contains electronics connectors and jumpers which are used to interconnect the vari- ous components and to allow the selection of various features In general, the connectors and jumpers have been setup for the type system you have ordered and no changes should be required. A description of each of these connectors and jumpers is provided for refer- ence See Figure and4 Slot8 Slot Slot 6 Slot 5 Slot Slot 3 Slot Slot Power Supph Conne PS8 Supply Connecton Figure Connectors and Jumpers Figure 4 below is an enlargement view of the connectors and ...
